
Petroleum & Petrochemical Water Treatment
Petrochemical Water Treatment
Klean Water provides world-class commercially proven water treatment technologies & solutions for the oil & gas, mining and municipal sectors. Petroleum and petrochemical facilities are the most concentrated expression of that duty: multiple process units, multiple effluent streams and an oil-in-water obligation that applies to all of them.
Hydrocarbon separation across many streams
Desalter brine, process condensate, tank drainage, stormwater from bunded areas and general plant washdown all carry hydrocarbon in different forms and concentrations. Klean Water units separate hydrocarbons from industrial wastewater, recovering product that would otherwise leave as effluent loss and protecting every downstream treatment stage from the fouling that oil carry-over causes.
Reuse inside the fence line
Once hydrocarbons are removed, the units purify wastewater so it can be recycled and reused in-process. Within a refinery or petrochemical complex there are substantial non-potable demands — cooling make-up, washdown, utility service — that treated effluent can satisfy. Meeting them internally lowers freshwater intake, lowers discharge volume and reduces the plant's exposure to abstraction limits and effluent permit pressure at the same time.
- Hydrocarbon recovered from desalter, condensate and drainage streams
- Treated water returned to cooling, utility and washdown duties
- Lower intake and lower discharge from a single system
Salinity and dissolved solids
Repeated reuse concentrates dissolved solids, and some streams are saline from the outset. Because the units also desalinate, the reuse loop can be sustained rather than stalling at the point where conductivity becomes the limiting factor.
Proven before it is tied in
Tying new equipment into a live refinery is disruptive and tightly scheduled. Pilot testing & verification on actual plant effluent establishes achievable performance in advance, modular technology compresses the site works into a manageable window, and remote monitoring keeps performance visible between turnarounds. Klean Water is wholly owned by Klean Industries.
Turnarounds set the schedule
In a refinery or petrochemical complex, the available window governs what is practical. Tie-ins, civil works and commissioning compete for the same turnaround slot as every other capital project, and overrunning that window is expensive in lost production. Modular water treatment is well suited to this constraint because the bulk of fabrication, assembly and function testing happens off site. What remains is foundations, connections and commissioning, which is a far smaller and more predictable scope. Combined with pilot work completed in advance, it means the process question is already closed before the window opens, and the site effort is installation rather than development. Between turnarounds, remote monitoring provides the performance visibility that keeps the unit inside its operating envelope.
Recover hydrocarbon and reuse water inside the fence line
Klean Water separates hydrocarbons from refinery and petrochemical effluent, purifies it for cooling and utility reuse, and desalinates to sustain the loop.
Pilot testing & verification proves performance on your actual effluent before a modular tie-in, and remote monitoring covers the periods between turnarounds. Klean Water is wholly owned by Klean Industries.
Shall we assess your plant's effluent streams?
Contact Klean Industries about petroleum and petrochemical water treatment » GO.
